Cortex CBF 496

Cortex CBF 496

Automatic fish skinner with CF technology and universal application.

Features and application range

cutting width:

430 mm

cutting speed:

29 m/min

features:

3 methods of skinning:

  • deep skinning with sharp blade
  • thin skinning (shallow skinning) with sharp blade
  • pulling-off the skin with blunt blade (silver skinning)
application:
  • special application for fish with thick skin, e.g. salmon trout, flat fish like plaice, sole, dorado etc.
  • also suitable to skin fish with thin skin
  • to skin fish fillets or one side of flat fish

Standard equipment

  • infeed conveyor
  • discharge conveyor
  • tooth roller (AISI 316L) with grooves and scraper comb (CF technology)
  • water cleaning unit for steady continuous operation
  • blade gap infinitely adjustable
  • spring suspended blade holder for perfect skinning results
  • pressure units with counter weights, infinitely adjustable
  • special hard pressure roller for fish
  • infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
  • NOCK POWER PLATES® for a machine construction which is easy to clean, for outstanding robustness and service friendliness
  • NOCK EASY-FLOW® safety covers for reliable product flow and better hygiene during processing
  • Protective cover in the machine outlet for increased safety at work
  • lockable castors
  • stainless steel
  • stainless steel bearings

Options

  • inflated pressure balloon
  • discharge conveyor for removed skin
  • transport roller with coarse or fine toothing
  • turn around device for the automatic skinning of both sides of flat fish with 2 machines
  • foot switch
  • Cleaning trolley for storage and cleaning of dismountable parts like: conveyors, belts, pressure roller and blade holder

Technical data

Cortex CBF 496

cutting width

430 mm

cutting speed

29 m/min

maximum throughput height

70 mm

blade gap

0 - 5 mm infinitely adjustable

apply length on infeed conveyor

400 mm

infeed conveyor (1)

850 x 425 mm

discharge conveyor (1)

850 x 425 mm

discharge conveyor for removed skin (1)

650 x 425 mm

overall dimension W x H x D

800 x 1190 x 1860 mm

weight

250 kg

motor performance

0.75 kW

electrical connection

3 AC - 400 V - 50 Hz
IEC 60309 16 A 6h
other voltages upon request

water connection

G 1/4 internal thread

water consumption

approx. 200 l/h

compressed air

not required

(1) external dimension of the conveyor frame

More information

YouTube

If you would like to watch the following videos, you will be redirected to the YouTube website by clicking on the following link. YouTube's privacy policy will then apply:

Any questions?

Privacy note

This website uses external components as i. e. Matomo and YouTube which can be used to collect data about your motion. Privacy information